Martin Audio MLA MINI, Advanced User'S Manual

Page: 67 / 256

MLA Mini Advanced User Guide V1.0
67
MLA MINI
ADVANCED USER GUIDE
Step 3: Next, raise the two front lugs of the Flying Frame to their upright position, and secure.
These will mate with the front slots of the first Mini. Fit the first MLA Mini cabinet onto the
Flying Frame, locking the two front slots into place with Flying Pins. Note that the front of the
Flying Frame should be flush with the lower front edge of the cabinet.
Step 4: Lift the rear of the cabinet and attach the top end of the Ground Stack bar to the rear
bracket by matching the Ground Stack symbol on the bar to the Ground Stack symbol on the
bracket. Secure with a Flying Pin.
Step 5: Lift the next cabinet on top of the previous one and secure both the front corners with
further Flying Pins. At the rear, rotate the upper cabinet’s flip-down bracket so that it engages
with the slot in the lower cabinet, and set the angle between the first and second cabinets to that
defined by Display Mini 2.1 by fitting a Flying Pin in the appropriate hole on the lower bracket.
Step 6: Repeat Step 5 either twice (for a four-cabinet array) or six times (for an eight-cabinet
array) to add the remaining MLA Mini cabinets, while referring to the results obtained from
Display Mini 2.1 to set the correct angles.
Step 7: The connections to the Mini array (see page 28) are most conveniently made at this
stage.