manualshive.com logo in svg

Martin Audio MLA MINI, Advanced User'S Manual

Share
Download
Martin Audio MLA MINI Advanced User'S Manual Download Page 179

MLA Mini Vu-Net 

V1.0

179

MLA MINI    

VU-NET

‘Welcome’ opens the splash screen that is displayed when Vu-Net is run for the first time:

The lines ‘Go to Martin Audio website’ and Go to MLA website are hyperlinks and clicking on 
them will take you directly to the respective website if your PC is connected to the internet.

The window can be closed in one of three ways:

1. 

Click on ‘Start using the software’

2. 

Click on the x in the Welcome box in the top left of the window:

3. 

Click on the drop down arrow in the top right of the window and select  ‘close’:

Any of these will close the welcome screen to reveal the project window.

User Guide: This is essentially a link to this very guide slightly rearranged for use in the field 
when running the software. The contents page features links directly to the specific subject so 
you can very quickly navigate to where you need to be to discover the answer to something you 
don’t fully understand. 

Essential Reading: This opens a pdf document that outlines the new features in the latest 
version of Display 2.2 and how they affect their implementation in Vu-Net.

Summary of Contents for MLA MINI

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands