Martin Audio MLA MINI, Advanced User'S Manual

Page: 104 / 256

MLA Mini Display 2.2 V1.0
104
MLA MINI
DISPLAY 2.2
And finally for a pole mount system the maximum is
4 cabinets:
Note that it is essential that the array design in Display 2.2 matches the physical array being
used. The optimisation files that Display creates can only be uploaded to an array that exactly
matches the file. The option to create arrays that are not multiples of four is to future proof the
system for developments in system hardware that may allow powering of arrays that are any
number from two to sixteen
Finally you need to give the array a name. This is important as the D2P file created with the
optimisation for that array will have the name that you assign at this point. If you wish to try
several optimisations one method is to duplicate the design adding another array and entering
the same venue and array properties but to give the array a different name that is appropriate to
the optimisation that you are attempting.
Once you have entered the array details the dashboard will change, the array details section will
turn green and the design process tabs will appear:
You will notice on the right hand side the ‘Rename’ box. This gives you the opportunity to rename
your array. Simply click in the box, type in the new name and press return. The Rename box will
briefly turn green and the array name will change on the tab.