manualshive.com logo in svg

Martin Audio MLA MINI, Advanced User'S Manual

Share
Download
Martin Audio MLA MINI Advanced User'S Manual Download Page 216

MLA Mini Vu-Net

 V1.0

216

MLA MINI    

VU-NET

The network is monitored in real time so as soon as any network or cabinet issues have been 
resolved the connections and cabinets will return to the regular colour scheme:

RIGHT-CLICK MENU

Access to array or Merlin functions are achieved in two ways; double clicking or right clicking, 
first we will look at the options available when selecting an element with a right mouse click as 
there are some configuration options that you may need to select first from this page. The right 
click menu varies according to the device selected:

 

From left to right these are the right-click menus for the Merlin and MLA Mini

‘Open’ will open the full configuration page in exactly the same way as a double click

‘Load’ for a Merlin offers two options, either load a saved Merlin Configuration file created using 
the Save function, or load a Preset file which will import a binary file created in XTA’s Library 
Manager.

Summary of Contents for MLA MINI

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands