manualshive.com logo in svg

Martin Audio MLA MINI, Advanced User'S Manual

Share
Download
Martin Audio MLA MINI Advanced User'S Manual Download Page 174

MLA Mini Vu-Net

 V1.0

174

MLA MINI    

VU-NET

This shows the web URL for the system to search for firmware updates which will be covered in 
the Firmware chapter. This should not be changed unless notification is received from Martin 
Audio to do so. If however it accidentally gets changed or deleted it is possible to reset all 
Default parameters by clicking on the Restore Defaults button. Note that this restores ALL 
Preferences so any that you wish to retain will have to be re-entered.

Help: Next are options for how the Help menu is displayed:

By default the help window is displayed in a dedicated help browser but you can select it to open 
in your default Internet Browser. Context help which responds dynamically to objects selected 
can be displayed as a window on the application or as an “Infopop”

Help includes a sub-menu for accessing help from remote infocenters. This is not currently 
operational and will be a future upgrade.

Master Overview: There is an option within Master Overview to show the Merlin Controllers in 
the system in the Overview tab. This is for systems where Merlins are used purely as a network 
interface with no audio passing through them which would make it unnecessary to monitor them 
in the Master Overview screen

Summary of Contents for MLA MINI

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands