manualshive.com logo in svg

Marsh PatrionPlus, Technical Manual

Share
Download
Marsh PatrionPlus Technical Manual Download Page 60

 

Installation

 

29669/02080 Rev AF

 

3-19

 

Controller Mounting 
Configurations

 

Once you have established a location (see “Establishing Locations” on 
page 3-3), choose which mounting option is best for your application. The 
options are table mount, NEMA enclosure, and floor stand mount.

 

Table Mount

 

Place the controller on a level table or other surface. No extra bracketry, or 
hardware is required.

 

NEMA Enclosure

 

The NEMA enclosure provides protection for the controller in harsh 
environments. The enclosure can be mounted to a vertical surface or onto a 
flex stand. To mount your controller in a NEMA enclosure, follow the 
instructions included with the enclosure.

 

Floor Stand Mount

 

The floor stand mount offers the most flexibility because it can be moved to 
accommodate changes in your system layout. To mount your controller on 
a floor stand, follow the instructions included with the floor stand 
controller bracketry kit.

Summary of Contents for PatrionPlus














































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands