Operations
4-75
Restoring PH Setup, Messages, and Logos
Use the Restore option to copy backed up printhead setup, message, or VJ
logo files from a personal computer to either the controller that the files
were copied from or to one or more other controllers. To restore files, you
must first access DOS (see “Accessing DOS” on page 4-72). Follow the
instructions below closely to know when to work from the controller and
when to work from the computer.
Note: Be sure to shut down the computer, and unplug the controller before
connecting any cables.
To connect your computer to the controller, use a standard RS-232 cable.
Plug the 25 pin male D-type connector into the controller. Plug the other
end (depending on your computer, either a 25 or 9 pin female D-type
connector) into the serial port on your computer.
From the computer:
1) Access DOS with Windows not running.
From the controller:
2) Press Utility. A menu is displayed.
3) Highlight Restore, then press Enter.
Summary of Contents for PatrionPlus
