Marsh PatrionPlus Technical Manual Download Page 177

Page: 177 / 269

Troubleshooting

6-16

29669/02080 Rev AF

3) Disconnect the ink line, data lines and power supply cables from the

printhead.

4) Remove the ground wire. (See Figure 6C.)

5) Remove the printhead enclosure.

6) Remove the printhead assembly from the case. (Nozzle blocks must be

removed with the printhead assembly.) Take care not to stress the ink
lines.

7) From your Backflush Kit, obtain the large syringe (60cc).

8) Cut 3/8" (0.95 cm) of ink tubing and attach it to the large syringe.

Figure 6C: Removing the Printhead Assembly

Valve Driver
Board

Back Plate

Screw

Printhead
Enclosure

Valve Tree

Nozzle Block

Ground Strap

Ground Wire

Screw

Printhead Cover

Nozzle Block
Slot

Summary of Contents for PatrionPlus














































































































































































































































































Search results

Summary of Contents for PatrionPlus

Reviews:

Brands by name

Popular brands

Marsh PatrionPlus, Technical Manual

Search results

Summary of Contents for PatrionPlus

Reviews:

Brands by name

Popular brands