Operations
4-25
Creating a Message
1) Review your printhead configuration.
a. From the home screen, press Set Up.
b. Highlight Printheads, then press Enter.
c. Note the type of printhead on each print line. Make sure the last
printhead to finish printing for this message, has been selected as
the master printhead. (See “Designating a Master Printhead” on
page 4-14.)
d. When finished viewing, press OK.
2) From the home screen, press Messages.
3) Highlight New, then press Enter. A new message screen is displayed.
The Current Position and Columns Remaining numbers in the message
screen tell you the position of the cursor. Use the numbers to help you
position your message elements.
4) Add up to 64 message elements. If you exceed the memory limit, a
memory full warning will appear. Make sure the vertical position of
each message element matches the printhead configuration.
5) Preview the message element placement. (See Page 4-43.)
6) Save the message. (See Page 4-44.)
7) Verify the message setup. (See Page 4-45.)
Note: You can view only four print lines at a time; use the arrow keys on your
controller keypad to view the remaining lines.
Summary of Contents for PatrionPlus
