manualshive.com logo in svg

Marsh PatrionPlus, Technical Manual

Share
Download
Marsh PatrionPlus Technical Manual Download Page 81

 

Operations

 

29669/02080 Rev AG

 

4-9

 

Printhead Configuration

Dual Tasking

 

Note: Custom Fonts and logos for HR Series printheads are not available on 
Task 2.

 

If you are dual tasking, you will need to configure the printheads for each 
task. 

From the home screen, press 

 

View Task

 

 to switch between tasks before 

setting up your printheads.

 

Printhead Setup

 

1) From the home screen, press 

 

Set Up

 

.

2) Highlight 

 

Printheads

 

, then press 

 

Enter

 

. The Printhead Setup screen is 

displayed.

The printhead icons appear from left to right in the order of the printhead 
DIP switch settings. (See “Setting Printhead DIP Switches in VJ Printheads” 
on page 3-7.)

The Printhead Setup screen displays setup information for only those 
printheads connected to the controller. If there are no printheads connected 
to the controller, a warning is displayed.

Summary of Contents for PatrionPlus














































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands