Operations
4-77
Creating and Downloading a Logo
HR Series Printheads
HR Series logos require the use of Keymaster software for downloading.
(To order see the Parts List.) Create and download logos according to the
procedures in your Keymaster Software Manual.
VJ Printheads
1) Create your logo in a paint or graphics program on a computer and
save it as a PCX file. The maximum logo size is 32 pixels high and 128
pixels wide.
2) Connect your controller to the computer using the 25-pin, RS-232
ports.
3) Configure your computer for downloading. (Follow the appropriate
procedure below for your computer operating system.)
Computer Operating Systems Prior to Windows® 95:
1) From the Windows® desktop, click Accessories.
2) Click Terminal.
3) Click Settings.
4) Click Communications.
5) Select the following flow control parameters:
• Baud Rate: 9600
• Data Bits: 8
• Stop Bits: 2
• Parity: None
• Flow Control: None
6) Click OK.
7) From Transfers menu, select Send Binary File.
8) Select the PCX file you want.
9) Click OK.
10) Go to “Downloading to the Controller (VJ Printhead Logos only)” on
Summary of Contents for PatrionPlus
