Marsh PatrionPlus Technical Manual Download Page 151

Page: 151 / 269

Operations

29669/02080 Rev AG

4-79

Downloading to the Controller (VJ Printhead Logos only)

1) From the controller home screen, press Utility.

2) Highlight Download Logo, then press Enter. The Existing Logos screen

is displayed.

3) Type the name of the logo to be downloaded from the computer in the

field located beneath the Existing Logos field.

4) Press Download. The logo will be downloaded from the computer,

and, when finished, will be listed under Existing Logos and shown on
screen.

Notes:

If your logo does not download:

– You may have chosen the wrong com port; select a different com port.

– Verify that the communication cable is wired (pinned) correctly.

– The logo may exceed the number of print lines available.

HR/120

HR/300

Valvejet

Logo Icons

Summary of Contents for PatrionPlus














































































































































































































































































Search results

Summary of Contents for PatrionPlus

Reviews:

Brands by name

Popular brands

Marsh PatrionPlus, Technical Manual

Search results

Summary of Contents for PatrionPlus

Reviews:

Brands by name

Popular brands