background image

REVERB

 applies reverb effects to the drum kit. 

Each  instrument  can  have  its  own  REVERB 
percentage  value;  to  apply/modify  reverb, 
simply increase the reverb percentage for each 
instrument,  in  the  REVERB  section  of  each 
instrument's menu.
When  you  select  REVERB,  the  following  sub-
menu will appear:

PRESET 

(to apply preset reverbs)

Drummer 1

  Small room/hall                                                0.5 sec

Drummer 2

  Small dark room/hall with pre-delay                   0.5 sec

Solid Verb

    Fat medium reverb                                           0.8 sec

Bright Slam

  Bright small reverb                                          0.9 sec

Thin Verb

     Thin reverb                                                       1 sec

Rounded

      Medium smooth reverb                                       1 sec

Dark Side

     Dark medium reverb                                          1 sec

Rich One

      Rich fat medium hall                                         1.2 sec

Fat Stage

     Fat wide medium hall                                        1.4 sec

Ballad 1

       Medium-rich hall with pre-delay                          1.4 sec

Ballad 2

       Medium-rich hall with pre-delay (darker than 1)   1.8 sec

Ballad 3

       Medium-rich hall with pre-delay (darker than 2)   2.4 sec

LX Class

       Big class hall                                                     2.9 sec

Garage

         Deep dark reverb                                               3 sec

Big Hall

        Big and rich hall                                                3.5 sec

If you want to customize your reverb settings, the following parameters can be modified:

Level

: Controls the amount of the effect (0% - 100%).

Pre-delay

: Sets the amount of time elapsing between the dry sound and the onset of 

reverberation. It can be used to create a sense of distance and volume within an acoustic 
space (0 - 200 msec).

Diffusion

: Controls the degree to which the density of the initial echo increases over time 

(0% -  100%).

Shape

: Determines the contour of the reverberation envelope. With SHAPE all the way 

down, reverberation builds explosively and decays very quickly. As the SHAPE value is 
raised, reverberation builds up more slowly (0% - 100%).

Time

: Sets the duration of the reverberation tail (0.5 sec - 10 sec).

7

*PRESET
 level
 predelay
 diffusion

3.1 - 

REVERB

When you press the MENU button, you will see 
the following sections:

REVERB 

-> PRESET, LEVEL, PREDELAY, 

DIFFUSION, SHAPE, TIME COLOUR, HPF

EQUALIZATION 

-> PRESET, LOW GAIN, LOW 

FREQ, MID FREQ, MID GAIN, MID Q, HIGH 
GAIN, HIGH FREQ

*REVERB
 EQUALIZATION
 MIDI
 OUTPUT

MIDI

 -> INPUT, OUTPUT

OUTPUT

 -> MASTER VOLUME, OUT STEREO, OUT LEFT HAND, OUT MONO

SYSTEM

 -> SW REVISION, SW UPGRADE SM, SW UPGRADE PADS 

3. MENU

Summary of Contents for YES

























Reviews: