The
OUTPUT
menu configures the output
settings.
The following submenus are included in this
section:
MASTER VOLUME
: volume of the drums, from
-45dB to +6dB
OUT STEREO
: enable stereo output (default)
OUT LEFT HAND
: reverse left and right in the stereo output
OUT MONO
: enable mono output
When the Sound Module is powered off, the instruments are returned to their default
OUTPUT settings (stereo, 0dB).
The character '
>
' means 'option selected'.
The character '
*
' is the row selector; pressing OK selects the option in that row.
9
The
SYSTEM
menu is used to upgrade the
firmware of the Sound Module and of each pad.
The following submenu is included in this
section:
SW REVISION
: this displays the firmware
version of the Sound Module, DSP (Digital Signal
SW UPGRADE SM
: firmware upgrade of the Sound Module
- Power off the Sound Module;
- Disconnect all Sound Module cables: 1/4" instrument cables, aux in, headphone and
BUS cables;
- Copy the mdf firmware file onto the SD card from your computer, and then put the
SD card back into the Sound Module;
- Turn on the Sound Module;
- Press the MENU button, then select: SYSTEM -> SW_UPGRADE_SM
The following warning will appear:
SW UPGRADE
SOUND MODULE
PRESS OK
- Press OK (or back to skip);
- Wait for one minute; and when white buttons (CREATIVE FX, MENU, LOOP REC)
start blinking, you can power off the Sound Module to complete the upgrade
procedure.
Warning: if you power off the Sound Module during the firmware upgrade, the Sound
Module will not start again!
*MASTER_VOLUME
>OUT_STEREO
OUT_LEFT_HAND
OUT_MONO
*SW_REVISION
SW_UPGRADE_SM
SW_UPGRADE_PAD
SW_RECOVERY_USB
RAW_DATA
Processing), and the firmware version of each pad.
3.4 -
OUTPUT
3.5 -
SYSTEM
When the Sound Module is powered off, the
instruments are returned to their default MIDI
settings (off).
*OUT_ENABLE
>OUT_DISABLE
OUT_ADDR
The character '
>
' means 'option selected'.
The character '
*
' is the row selector; pressing OK selects the option in that row.
