MARIMEX 19000848, Installation Manual

Page: 54 / 128

54
Step 5
Insert springs by using the tensioning
equipment. At first, stretch each fifth
spring so the jumping area could be
evenly tightened in the middle of the
frame. Because of this, mounting of the
residual springs will be easier.
Step 6
Now, the trampoline looks like this:
Step 7
Place the cover of springs onto the
trampoline so the springs are fully cove-
red and fasten with rubber bands.
Step 8
Connect the bottom and upper part of the protective net rack and draw the sleeve
through the entire rack. Connect all the rods in the same way.