Maretron DSM150, User Manual

Page: 232 / 274

DSM150
User’s Manual
Page 216 Revision 1.4.18

Color-Error
– select the color to be displayed when the controlled load is in the ERROR state,
which may indicate a tripped breaker. The default color is red.

Type
– you may choose between the default value of “Toggle”, in which case the
switch/breaker changes state every time you press the power button while it is highlighted, or
“Momentary”, in which case the switch-breaker is turned on only while you are pressing the
power button while it is highlighted.

Instance
– the instance number of the switch bank containing the switch/breaker to be
controlled.

Channel
– the channel number of the switch/breaker to be controlled.

Title
– Sets the text string to be displayed on the switch/breaker. Please refer to Section
5.2.6.4.4 for details.

Font Size
– Sets the size of the font used to display the label on the switch/breaker. You may
select Small, Medium, or Large (default).

Restore Factory Defaults
– This restores the switch/breaker to factory default settings.
In order to control a switch/breaker using the DSM150, create a screen with a switch/breaker which
has been configured to refer to the switch bank instance and indicator number of the switch/breaker
you want to control.
In normal operating mode, use the “Scroll Up” and “Scroll Down” keys to change to the screen
containing the switch/breaker
. Once that screen is displayed, follow these steps to change a load‟s
state:
1.
Press the “Enter” key for approximately one second. This will place the display into “Control
mode”, and one of the switches/breakers on the screen will be highlighted with a thick border,
as shown in Figure 254 below.
2. If there is more than one switch/breaker on the screen, you may u
se the “Scroll Up” and “Scroll
Down” keys to change the highlight to a different switch/breaker.
3. Once the switch/breaker
for the load you want to control is selected, then press the “Power”
key. The load referenced by the switch/breaker will be commanded to change state, and the
changed state will be reflected in the switch/breaker.
4. To change other loads, repeat the process.
5.
To stop controlling loads, press the “Lights” key to return to normal operating mode. The
highlight will disappear.