Maretron DSM150, User Manual

Page: 194 / 274

DSM150
User’s Manual
Page 178 Revision 1.4.18
To program the - to sender gauge resistance, use the Scroll Up ( ) or Scroll Down ( ) keys to
move the highlighted cursor over the “Gauge Resistance, - to Sender:” menu item. Then, press the
Enter key (
) to move the highlight over the numerical resistance value. Use the “Increase” and
“Decrease” keys to change the value to the measured resistance value, and finally, press the Enter
key (
) to confirm your selection and store the value within the TLA100.
Figure 200
– Configuring the - to Sender Gauge Resistance