Maretron DSM150, User Manual

Page: 124 / 274

DSM150
User’s Manual
Page 108 Revision 1.4.18
You can enable or disable the transmission of a PGN message, or set the frequency of transmission
of the message by pressing the Enter key (
) on the message to be configured. Options are:
Off
– The PGN will not be transmitted
On
– The PGN will be transmitted at its default NMEA2000 rate.
0.5s…5s – The PGN will be transmitted at the interval specified.
Select the required option using the
Scroll Up and Scroll Down keys followed by the Enter key.
6.13.1.4 Restore Factory Defaults
This option restores all settings on the device to their factory default state.
6.13.2 Channel #0-5
This submenu contains configuration parameters for each of the six channels. These menus look
different depending on whether the channel‟s Function has been set to “Tank” or “Pressure/Vacuum”.
6.13.2.1 Channel #0-5 (Tank)
This section describes the channel configuration menu when the
channel „s Function has been set to
“Tank” mode. The Channel #0-5 (Tank Mode) menu is too large to fit on a single screen, so it is
shown in two separate screenshots below.
Figure 98
– FPM100 Channel #0 First Configuration Screen (Tank Mode)