50 - Installation manual - Ecotype
•
Reposition the rivets for fixing the tarpaulin and the PE flat stripe to the support.
•
After the replacement of the bow the tarpaulin is again ready for use.
Note:
In case of electrically operated handling system remember to restore the emergency case standby by unlocking
using the relative key.
5.2 Tarpaulin replacement
•
Remove the rivets positioned on the tarpaulin outside which fix the same to the
supports of the various bows;
WARNING!
For carrying out certain maintenance work the access to the internal space of the tipper body is
required. Make sure that the internal space is empty and clean to avoid any sliding and falling. Wear
suitable protective clothing.
DO NOT WALK ON THE TARPAULIN!
The manufacturer denies any liability.
•
On the frontside of the tipper body remove the profile which fixes the tarpaulin.
•
Inside the tipper body remove the cable ties which fasten the tarpaulin to the bows
•
Remove the damaged tarpaulin.
•
Proceed to position the new tarpaulin.
•
Inside the tipper body fasten the tarpaulin to the various bows by using common cable ties for standard PVC tarpaulins.
CAUTION!
Using standard cable ties is not permitted with fire-resistant PVC or polyurethane tarpaulins.
. Demand the proper cable ties for fire-resisting tarpaulins of the manufacturer.
The manufacturer denies any liability.
•
Reposition the rivets which hold the tarpaulin in place.
•
Tighten up the front part of the tarpaulin.
•
Fix the tarpaulin on the top of the tubular frame employing the specific
clamping plate and rivets.
•
Cut the excess tarpaulin part off.
5.3 Steel cable replacement
For replacing the steel cable refer to paragraph 3.4.
