Installation manual - Ecotype - 49
C
C
h
h
a
a
p
p
t
t
e
e
r
r
5
5
M
AINTENANCE WORK OF THE
E
COTYPE
C
OVERING
S
YSTEM
The covering system is subject to stress and wear and tear as well as it is exposed to weather effects. For these reasons the
system components can suffer wear and tear and their replacement can become necessary.
Hereinafter the description of the operations for the necessary replacements of the main components of the covering
system.
5.1 Bow replacement
For replacing a bow proceed as follows:
WARNING!
In case of electrically operated covering system, before every maintenance work, take care to activate
the safety shutdown with the key. As soon as the maintenance or repairing work has been performed
remember to remove the key from the emergency mushroom pushbutton.
•
Find out the bow that needs to be replaced;
•
Remove the rivets positioned on the tarpaulin upper side which fix the same to
the bow support;
WARNING!
For carrying out certain maintenance work the access to the internal space of the tipper body
is required. Make sure that the internal space is empty and clean to avoid any sliding and
falling. Wear suitable protective clothing.
DO NOT WALK ON THE TARPAULIN!
The manufacturer denies any liability.
•
Inside the tipper body remove the cable ties which fasten the
tarpaulin to the bow support.
•
Undo the self-tapping screws which fix the bow to its support;
•
Carry out the described operation on both sides;
•
Pull out both supports and remove the bow.;
At this point the damaged bow has been removed and the new one can be assembled.
•
Insert both supports in the respective end parts of the bow taking
care that the passage axis of the cables is the same of the others;
•
Fix the supports using the suitable self-tapping screws;
•
Inside the tipper body fasten the tarpaulin to the bow by using
common cable ties. Use fire-resistant cable ties with fire-resistant
PVC or polyurethane tarpaulins.
CAUTION!
Using standard cable ties is not permitted with fire-resistant PVC or polyurethane tarpaulins.
Demand the proper cable ties for fire-resisting tarpaulins of the manufacturer.
The manufacturer denies any liability.
