48 - Installation manual - Ecotype
IMPORTANT!
Pay special attention to the location of the Z-section guide:
When the covering is fully retracted
, the first hook
must be located
inside the guide
.
5. drill the side of the body and secure the Z-section guide using the self-tapping
(8)
screws provided.
You can now proceed with positioning the other hooks.
WARNING!
To ensure the correct operation of the covering, it is important to position the windsafe hooks at regular
intervals.
6. Proceed with installing the other hooks following the example shown in the figure.
Note:
If you find problems with the smooth sliding of the covering, check the height of the Z-section guide.
WARNING!
Please pay special attention to the correct positioning of each individual windsafe hooks to prevent later
problems with the operation of the system.
Note:
The correct diameter of the rear pulley, the size of the side guide and the location of the hooks are of fundamental
importance for the correct operation of the anchoring system. A non-standard size side guide or a rear pulley
positioned incorrectly may prevent the correct operation of the system.
