Blastmaster
®
Smart Box
14
INSTALLATION
Apply pipe thread
sealant to all pipe
threads to ensure an
airtight seal.
N-519
Always depressurize
the entire system,
disconnect all power
sources and lockout/
tagout all components
before any maintenance
or troubleshooting is
attempted. Failure to
comply with the above
warning could cause
electrical shock and
inadvertent activation of
equipment resulting in
death or serious injury.
W-562
Install Pressure Indicator - Bulk Abrasive Blasting Pot
Note: Additional components may be required to install Pressure Switch.
1) Disconnect Blastmaster 190 Assembly (1) from Watts Strainer (6).
2) Install Pipe tee (2) on Blastmaster 190 Assembly (1).
3) Install Pressure Sensor (8) on Pipe Tee (2).
4) Install Hex Nipple (3) on Pipe Tee (2).
5) Install Pipe Tee (4) on Hex Nipple (3).
6) Install Pressure Transducer (7) on Pipe Tee (4).
7) Install Hex Nipple (5) on Pipe Tee (4)
8) Install Watts Strainer (6) on Hex Nipple (5).
1
2
3
6
4
5
7
8
