March Networks GW-DS150N, Manual

Page: 38 / 65

2-3-4 Activate a profile
40
2. Click ‘WPS’ menu, and the following settings will appear.
2.6 WPS Configuration
Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes wireless network
setup become very simple. If you have WPS-enabled wireless access point, and you want to establish a
secure connection to it, you don’t have to configure the wireless access point and setup data encryption
by yourself. All you have to do is to go to the WPS setup page of this wireless card, click a button, and
then press a specific button or enter a set of 8-digit code on the wireless access point you wish to
establish a secure connection - just three simple steps!
For older wireless access points, it's possible to perform a firmware upgrade to become a WPS-enabled
access point. Since they may not have a hardware button to press for WPS setup, you can use an
alternative WPS setup method - input the pin code. Every WPS-compatible wireless network card support
pin code configuration method; you can just input the code to wireless access point, and the wireless
access point and wireless network card will do the rest for you.
This wireless network card is compatible with WPS. To use this function, the wireless access point you
wish to connect to must support WPS function too. Now, please follow the following instructions to
establish secure connection between WPS-enabled wireless access point and your wireless network
card.
2.7 WPS Setup
-PBC (Push-Button Configuration)
1. Right-click the Ralink configuration utility icon located at lower-right corner of computer desktop and
then click 'Launch Config Utility
，
.