March Networks GW-DS150N, Manual

Page: 24 / 65

Item Name Description
EAP Method
Select 802.1x EAP method from dropdown menu. Please ask the
administrator of the access point you wish to connect to select a correct EAP
method.
Tunnel
Authentication
Select 802.1x tunnel authentication type from dropdown menu. Please ask
the administrator of the access point you wish to connect to select a correct
tunnel authentication method. This pull down menu is only available when
authentication type you use is 'PEAP', ‘TLS / Smart Card', or 'TTLS'.
When you use 'EAP-FAST' as authentication type, the protocol setting is
always 'Generic Token Card' and can not be changed. You also need to
select 'Soft Token’ or 'Static Password’ as password in ‘ID \ Password'
setting.
'EAP Fast’ authentication type also have a sub-menu to set EAP fast-specific
parameters:
If you need to use protected authentication credential, check ‘Use protected
authentication credential' box, and click ‘Import’ to load .pac credential file; to
remove a loaded credential file, click 'Remove'.
Session
Resumption
You can enable or disable session resumption here. If you don’t know if you
should enable session resumption or not, please ask your 802.1x
authentication administrator.
ID \ Password tab Input 802.1x username (ID) and password and other information if it is
required here. Click ‘Show Password’ to show the password you typed.
Client
Certification tab
Use this tab to select a local certificate from dropdown menu. If the access
point you wish to connect required a specific client certificate, the certificate
must be installed on your computer, and
26