March Networks GW-DS150N, Manual

Page: 12 / 65

2-2-1-1 Scan for Other Wireless Devices
wireless I wired network clients.
Ad-Hoc mode is also know as ‘point-to-point’ mode, and in this mode, wireless devices such as
computer or PDA will not be capable to establish wireless connection with more than one wireless
device, and is suitable for establishing a one-to-one wireless connection between two wireless devices.
Before you can connect to any wireless access point or device by infrastructure or Ad-Hoc mode, there
two things you must know:
a. Wireless device’s ‘SSID’ (Service Set IDentifier, someone will call it 'access point’s name’).
You can scan for the SSID of other wireless devices nearby, but if the SSID of the wireless
device you wish to connect is hidden, you must know exact SSID before you can establish
connection with it.
b. If the wireless device you wish to connect uses encryption, you must know its encryption
key.
Please launch
Ralink
setup utility and it will scan for wireless access points near by:
Scan results will be displayed here, please check if the wireless device (access point or another
computer) with the SSID you wish to connect is shown here.
Scan result includes 6 types of information, they are: