March Networks GW-DS150N, Manual, Page: 16 / 65

There are 4 types of technical information:
General: Displays basic information about this access point, such as SSID, MAC Address,
authentication / encryption type, channel etc.
WPS: If this access point supports WPS (Wi-Fi Protected Setup), related information will be
displayed here.
CCX: If this access point supports CCX (Cisco Compatible extension), related
information will be displayed here.
802.11n: If this access point complies with 802.11n draft, related information will be
displayed here.
And here are descriptions of every setup item in setup area:
If the wireless access point you wish to connect is found, you can establish connection with it by clicking
‘Connect’ button. Instructions will be given as follow:
Item Name Description
Sorted by »
You can decide how to sort all listed access point by ‘SSID’,
‘Channel’, or ‘Signal’ (signal strength).
Show dBm
Check this box to show the signal strength of access point, instead
of percentage.
Rescan
Click this button to rescan access points. You can click this button
for several times, if the access point you wish to use does not show
in the list.
Add to Profile
You can store a specific access point to profile, so you can link to
that access point directly next time, without inputting authentication
key again.
To add an access point to profile, you have to select an access point
from the list first, then click ‘Add to Profile’ button. Detailed
instructions will be given below.
Connect
Connect to a selected access point. You have to select an access
point from the list first and then click ‘Connect’ to connect to the
selected access point.