March Networks GW-DS150N, Manual

Page: 37 / 65

39
In 'WMM Setup Status’ block, current WMM settings will be displayed. And here are descriptions of
every setup item:
Item Name Description
WMM Enable
Check this box to enable WMM function. Please click ‘Apply’ button on
the right of this check box after you check or uncheck this box, so
corresponding settings in this window will be activated or deactivated
respectively.
WMM - Power Save
Enable
Check this box to enable WMM power saving mode to save energy, and
let your computer’s battery live longer.
You also have to select WMM power save modes here:
AC_BE: Best Performance AC_BK: Worst Performance AC
一
VI: Video
data has priority AC_VO: Voice data has priority
Direct Link Setup
Enable
If you have another WMM-enabled wireless device, you can enter its MAC
address here, then click ‘Apply’ button, and this network card will establish
a direct link to the wireless device you specified here.
You also have to specify the timeout value of this directly-linked wireless
device. Valid values are from 1 to 65535 (seconds), and input ‘0’ for
infinity.
If you want to remove a specific wireless device from direct link table,
select the device and click this button to remove it.