Maquet SERVO-i V3.1, User Manual, Page: 94 / 283

92
Servo
…
User´s manual
US edition
Order No: 66 00 261
4
Infant Adult Universal Options
Waveforms
As default four waveforms are shown
simultaneously (If CO
2
Analyzer is
connected).
1. Each waveform displays one measured
parameter against time (x-axis). The
displayed variable and scale are
indicated on the y-axis.
2. The waveforms are color-coded (default
from factory):
– Yellow for pressure
– Green for flow
– Light blue for volume
– Light yellow for CO
2
concentration.
The waveform amplitude can be set
individually or by the system, using Auto.
Sweep speed can also be adjusted. For
further information see page 157. The
settings are effective from the first breath
after adjustment.
The displayed waveforms can be
configurated using Waveform configuration.
For further information see page 169.
Measured value boxes
The measured value boxes show measured/
calculated values in numerics and the unit
being used.
1. Set Lower and Upper alarm limits are
also shown.
2. If an alarm limit is exceeded, the box
turns red for a high priority alarm (page
72) and yellow for a medium priority
alarm (page 72). The exceeded limit is
indicated by an arrow.
3. A value out of range is also labelled "***".
4. Additional measured values can be
shown in the box.
6.2
8.5
6.5
15
20
10
8.5
8.5
6.5
30
40
11
6
User Interface - Functionality