manualshive.com logo in svg

Maquet SERVO-i V3.1, User Manual, Page: 119 / 283

Share
Download
Maquet SERVO-i V3.1 User Manual Download Page 119

117

Servo

… 

 User´s manual

US edition
Order No: 66 00 261

 

Infant

     

Adult

  

 

Universal

   

 

Options

 

4

WARNING! If the trigger sensitivity is set too 
high, a self-triggering (auto-triggering) 
condition may be reached. This condition 
can also be reached if there is leakage in the 
breathing system, e.g. if an uncuffed 
endotracheal tube is used. Triggering will 
then be initiated by the system and not by the 
patient.This should always be avoided by 
decreasing the trigger sensitivity (page 23). 
This is also important during transport as the 
movement of the body and the breathing 
system may lead to false triggering.

Cautions: 
• To prevent the ventilator from tipping over, 

the Patient Unit must be pushed into its 
locked position during transportation.

• If Battery modules are inserted, the 

ventilator should be connected to the 
mains when not in use. The Battery 
modules are then charged automatically.

• Batteries and O

2

 cell must not be 

disposed of with ordinary waste.

• Lock the gas cylinders firmly to the Mobile 

Cart.

• To prevent the gas cylinders from sliding 

out or tipping over, ensure that the straps 
are firmly fixed to the center of the 
cylinders. 

• When moving the Support Arm or 

changing position, watch the patient 
connection carefully to see that no pulling 
or other movement occurs.

• Store the system at a temperature between 

-25 

o

C and +60 

o

C (-13 

o

F to 140 

o

F) at 

<95% RH.

System transport and storage

Summary of Contents for SERVO-i V3.1




























































































































































































































































































Reviews:

No comments