Maquet SERVO-i V3.1 User Manual Download Page 125

Page: 125 / 283

123

Servo

…

User´s manual

US edition
Order No: 66 00 261

Infant

Adult

Universal

Options

Mobile Cart/positioning

1. Press the brakes to lock the wheels.

2. Place the Patient Unit on the console

plate using the guide pins.

3. Ensure the ventilator is firmly fixed to the

console plate by turning the security
knob tightly clockwise.

4. Use the locking handle to push or pull

the console.

5. Insert the panel.

If you want the Patient Unit oriented towards
the left or right.
6. Lift the locking handle and rotate the

Patient Unit until you hear a “click”.

7. Lift the locking handle.

8. Push in the Patient Unit to its end

position until you hear a “click”.

Cautions:
• The ventilator must only be used in an

upright position.

• Ensure the ventilator is positioned into its

locked position on the Mobile Cart Servo-i,
to prevent unintentional movements.

• Lock the wheels if the ventilator is not to

be used for transportation.

Summary of Contents for SERVO-i V3.1




























































































































































































































































































Search results

Summary of Contents for SERVO-i V3.1

Reviews:

Maquet SERVO-i V3.1, User Manual, Page: 125 / 283

Search results

Summary of Contents for SERVO-i V3.1

Reviews: