Maquet ROTAFLOW, User Manual, Page: 17 / 58

|
ROTAFLOW with ICU Kit
|
2 System Components
| 17 |
ROTAFLOW with ICU Kit | User’s Manual | English | 1.0
Copyright MAQUET Cardiopulmonary AG, Hirrlingen
2.1.2 FRONT PANEL
[1] Intervention LEDs
(only in modes “ART” and “ART
PULS”) The intervention LEDs indicate the interventions
selected (
Ö 4.7 “Modes “ART” and “ART PULS”:
Interventions”, page 38).
„ The intervention LED flashes whenever monitoring is
switched off during operation or when a fault occurs.
[2] Speed display This display shows the speed in rpm (revs per minute).
[3] Flow display This display shows the flow in l/min (liters per minute).
[4] Flow regulator You can use the flow regulator (rotary pressure knob) to
adjust the speed or flow (with flow regulation
connected). To do so, press on the knob, turn and then
release.
[5] Speed scale The scale is provided as a guide should the speed
display fail.
[6] Select button The select button is used to select the required setting
or value (
Ö 4.2 “Selecting settings”, page 33)
[7] Status display This display shows messages about the status of the
ROTAFLOW System (
Ö 9 “Messages”, page 49)
[8] Set button The set button is used to confirm the setting or value
selected (
Ö 4.2 “Selecting settings”, page 33).