Maquet ROTAFLOW, User Manual, Page: 25 / 58

|
ROTAFLOW with ICU Kit
|
3 Connection and Installation
| 25 |
ROTAFLOW with ICU Kit | User’s Manual | English | 1.0
Copyright MAQUET Cardiopulmonary AG, Hirrlingen
3.3 INSTALL ROTAFLOW DRIVE
1 Use the wing bolt to secure the ROTAFLOW Drive to a stable pole (diameter
25 mm … 40 mm) or to the holder for the ROTAFLOW Drive on the
ROTAFLOW Console.
2 Make sure that the on/off switch of the ROTAFLOW Console is switched off.
3 Connect the cable of the ROTAFLOW Drive to the “RFD Master” socket.
3.4 INSTALL ROTAFLOW EMERGENCY DRIVE
In emergencies operation can be maintained manually using a ROTAFLOW
Emergency Drive.
Use the wing bolt to secure the ROTAFLOW Emergency Drive to a stable pole.
Secure on the same side as the ROTAFLOW Drive.
WARNING!
In transport applications, all components must be attached to the holders
provided for this purpose and securely fastened (
Ö Instructions supplied with
holders for ELS System).
ATTENTION!
„ Switch off the ROTAFLOW Console before connecting or disconnecting the
cable of the ROTAFLOW Drive.
„ Make sure that the ventilation slit of the ROTAFLOW Drive is not blocked
during operation.
„ Make sure that no liquids enter the ventilation slit of the ROTAFLOW Drive.
„ Do not tip the ROTAFLOW Drive at an angle of more
than 90 degrees and do not turn upside down, as liquids
may enter the ventilation slit.
„ When using the ROTAFLOW Drive on the
ROTAFLOW Console, secure the
ROTAFLOW Drive in a position above the
ROTAFLOW Console to ensure greater
stability.