D
4.1
Fromy your parts kit, locate the
left X axis
mount.
The left X axis mount is identifiable by
its semi-circle idler mounts on the rear.
Press the bearings and bearing holders into
the X axis mount.
Ensure that the bearings and bearing carrier
are flush with the mount and insert the
6 M3 X 10 screws
to secure the bearing and
holder in place.
X Carriage Assembly
1
2
Locate the
Z Axis bearing holders
from your
parts kit, and
2 linear bearing
s from the
hardware kits.
The Z axis bearing holders are identified by
their 6 screw holes and slight chamfer on the
leading edge.
Press the linear bearings into the bearing
carrier and ensure that they are fully seated
and aligned.
N/A
48
X 6
M3 x 10
Summary of Contents for Mini V2
