mapleMaker Mini V2, Build Manual

Page: 42 / 138

C
3.1
Locate 1 M4 X 40 screw, 1 compression
spring, 2 washers, and one M4 nut.
Place the screw through the extruder
arm, afterwards place one washer, the
compression spring, a second washer,
and finally the nut onto the screw.
Thread the nut partially compress the spring.
Extruder Assembly
13
14
Locate 1 radial ball bearing and 1 M4 X 10
screw
from the hardware kit.
Insert the bearing into the opening of the
extruder arm, and using your
hex wrench
install the screw into the arm, and through
the bearing.
When tight, the bearing should still rotate
freely.
42
X 1
M4 x 10
X 1
M4 x 40