mapleMaker Mini V2, Build Manual

Page: 5 / 138

5
A
1.2
Table of Contents
This guide is broken into several sections which encompasses the build process of the
maplePrint Mini 3D printer. The process begins with the basic frame assembly and finishes
with the final wiring and installation.
While we try to maintain the most up to date diagrams and illustrations, there may be
slight differences between the illustrations contained within this guide, and the printed
parts in your kit. If there are major changes or differences between the instructions
contained within and the printed parts, you should have received an updated insert in
your kit containing the revised instructions.
Section A:
1.1 Introduction 2
1.2 Table of Contents 3
1.3 Required Tools 4
1.4 Reseller Information 5
1.5 Components 6
Section B:
2.1 Z Motor Assembly 16
2.2 Lower Frame Assembly 18
2.3 Upper Frame Assembly 24
2.4 Lower/Upper Frame Union 26
Section C:
3.1 Extruder Assembly 34
Section D:
4.1 X-Carriage Assembly 48
4.2 Y Carriage Assembly 62
4.3 Print Bed Assembly 76
4.4 Z Carriage Assembly 82
Section E:
5.1 GT2 Belt Installation 98
5.2 LCD Installation 102
5.3 RAMPS Installation 106
5.4 Upper Bed Installation 116
5.5 Wiring & Final Configuration 118
Section F:
6.1 Appendix 136