mapleMaker Mini V2, Build Manual

Page: 51 / 138

D
4.1
7
8
Locate the Z Axis bearing holders from your
parts kit, and 2 linear bearing s from the
hardware kits.
The Z axis bearing holders are identified by
their 6 screw holes and slight chamfer on the
leading edge.
Press the linear bearings into the bearing
carrier and ensure that they are fully seated
and aligned.
N/A
Fromy your parts kit, locate the right X axis
mount. Ensure that the bearings and bearing
carrier are flush with the mount and insert the
6 M3 X 10 screws to secure the bearing and
holder in place.
Locate one of the
M4 nuts
from the hardware
kit along with
2 M3 X 10
screws, along with
the
Z axis capture plate
.
Insert the nut into the X axis carriage.
Using your
hex wrench
, insert the screws into
the capture plate, and then attach the plate
to the X axis assembly.
51
X 6
M3 x 10