AVS S-SERIES INSTALLATION MANUAL - GEN 2 VER 5
20
Programming features Register 1 continued
Vehicle set up: Close all doors, bonnet & boot, arm & disarm alarm then turn ignition on, off & on.
Feature:
MAP feature 2-second entry delay / Factory remote interface mode (old OEM
Enhancement module) / Split lock & unlock button mode
Press the
button
this many times:
19
Factory setting:
OFF
Description:
This feature delays the doors, boot etc for two seconds. Use if the door light comes on
before the door unlocks.
When this feature is ON it also allows the old style OEM Enhancement module to
work. Note: if using this module the alarm will now arm on
button and disarm
on
when using AVS remote.
Feature:
Courier Mode
Press the
button
this many times:
20
Factory setting:
OFF
Description:
Courier mode allows the driver to leave the ignition on with the engine running and
arm the alarm. The alarm will be fully armed three seconds after pressing the
button. If the alarm is activated the system will shut the engine down and trigger as
normal.
When in courier mode the shock (AVS S4/S5), glass sensor (AVS S5) will be disabled
while the engine is running but will arm normally when the ignition is off. Note the
AUX input remains active in courier mode.
Note: The ignition must be on for more than 5 seconds before the alarm can be
armed.
