ECODRIVE DKC01.1/DKC11.1 Drive Controllers
Introduction to the system
1-5
DOK-ECODRV-DKC01/11.1*-PRJ3-EN-P
Servodrive with electronic gearbox function
M
Servodrive DKC01.1
with electronic gearbox function
AC-Servomotor
MKD
Drive processor
electronic gearbox
Position control
Speed control
Field-oriented
stator current
control
High-resolution
position interface
RS 485
Step motor
interface
Lead axis
transmitter
FS0203.fh5
MS-DOS - PC
®
Parameters
Diagnosis
Operating data
RS 232
Lead axis
position
3
~
~
~
Fig. 1-4: Servodrive with electronic gearbox function
•
Operating modes
Speed synchronization
Angle synchronization
•
The lead axis position is given in degrees (360 degrees represent one
lead axis encoder revolution)
•
The lead axis encoder must be connected to the DKC stepper inter-
face.
The maximum allowable signal frequency f
max
on the stepper interface
limits the number of lines Z
l
which can be emulated.
Buy: www.ValinOnline.com | Phone: 844-385-3099 | Email: [email protected]
