Manitowoc ICVD3095 Technician'S Handbook Download Page 243

Page: 243 / 350

Part Number Preliminary 6/11

243

ICE THICKNESS PROBE (HARVEST INITIATION)

FUNCTION
The ice thickness probe senses ice on the evaporator

and signals the control board to start a harvest cycle.

After ice forms on the evaporator, the ice will contact

the ice thickness probe. After 6 - 10 seconds of

continuous contact, a harvest cycle is initiated.
SPECIFICATIONS

Freeze Time Lock-In Feature

The ice machine control system incorporates a freeze

time lock-in feature. This prevents the ice machine

from short cycling in and out of harvest.
The control board locks the ice machine in the freeze

cycle and a harvest cycle can not start for six minutes.

Maximum Freeze Time

The control system includes a built-in safety which will

automatically cycle the ice machine into harvest after

60 minutes in the freeze cycle.

Maximum Temperature

Maximum temperature for the ice thickness probe is

120 degrees F (49 degree’s C). Do not clean probe in

a dishwasher or expose to temperatures above the

maximum.

Summary of Contents for ICVD3095































































































































































































































































































































































Search results

Summary of Contents for ICVD3095

Reviews:

Related manuals for ICVD3095

Brands by name

Popular brands

Manitowoc ICVD3095, Technician'S Handbook

Search results

Summary of Contents for ICVD3095

Reviews:

Related manuals for ICVD3095

Brands by name

Popular brands