Manitowoc ICVD3095 Technician'S Handbook Download Page 89

Page: 89 / 350

Part Number Preliminary 6/11

WATER FILTER

The ice machine has a feature that displays a replace

water filter reminder at a set time interval.

1. From the Set-Up menu, use the Down arrow to

highlight Water Filter.

2. Press the Checkmark. You can record the filter

type on this screen by highlighting Filter Type and

pressing the Checkmark.

3. After making your selection, press the Left arrow

to return to the previous screen.

4. On this screen, you can also choose to turn the

reminder to AUTO or OFF by highlighting your

choice and pressing the Checkmark. Selecting

one will deselect the other.

5. You can further choose the time interval from this

screen by highlighting Set Interval and pressing

the Checkmark.

6. Press the Left arrow to return to previous screens

and to the Set-Up menu.

LUMINICE™ REMINDER

The LuminIce™ growth inhibitor recirculates the air in

the ice machine foodzone over a UV bulb. This

process will inhibit the growth of common micro-

organisms on all exposed foodzone surfaces.
The Ionic Minder is a feature that displays a reminder

to change its bulb every 12 months.

1. From the Set-Up menu, use the Down arrow to

highlight Ionic Minder.

2. Press the Checkmark. On this screen, you can

choose to turn the reminder to AUTO or OFF by

highlighting your choice and pressing the

Checkmark. Selecting one will deselect the other.

3. When the check reflects your preference, use the

Down arrow to navigate to Exit and press the

Checkmark. The display will return to the Set-Up

menu.

Summary of Contents for ICVD3095































































































































































































































































































































































Search results

Summary of Contents for ICVD3095

Reviews:

Related manuals for ICVD3095

Brands by name

Popular brands

Manitowoc ICVD3095, Technician'S Handbook

Search results

Summary of Contents for ICVD3095

Reviews:

Related manuals for ICVD3095

Brands by name

Popular brands