manualshive.com logo in svg

Manitowoc convotherm 4, User Manual

Share
Download
Manitowoc convotherm 4 User Manual Download Page 65

4.3.4  Placing food in the mobile shelf rack / plate rack (does not apply to

ConvoSmoke)

For your safety when using the appliance

Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings

specified in 'Working safely with the appliance' on page 57, and follow the instructions given there.

Hot liquids

Risk of scalding from hot liquids
Spilling liquid foods can result in scalds to face and hands.

Make sure that the transport securing mechanism on the mobile shelf rack / plate rack is engaged

while you are taking food in or out.

Do not exceed the maximum loading weight during loading.

Only use containers with the correct GN dimensions or approved plates of the correct diameter to

fit.

Insert the food containers correctly in accordance with the rules on page 42 for an appliance of size

X.10 or on page 44 for an appliance of size X.20.

Always place containers or plates holding liquids or holding food that will liquefy during cooking on

shelf levels that allow a proper view into the container for all users. Always take out horizontally any

containers or plates holding liquids or holding food that will liquefy during cooking.

Wear personal protective equipment.

Hot food and hot food containers

Risk of burns from hot food and hot food containers
Food containers placed on L-shaped rails can tip off the shelf levels. This can result in burns to the

entire body, but particularly to the face and hands.

Make sure that the transport securing mechanism on the mobile shelf rack is engaged while you

are taking food in or out.

Do not exceed the maximum loading weight during loading.

Only use food containers (baking trays, shelf grills) of the correct size to fit.

Insert the food containers correctly in accordance with the rules on page 43 for an appliance of size

X.10 or on page 44 for an appliance of size X.20.

Always keep food containers horizontal when removing them from the oven, and do not pull food

containers too far forward in the shelf levels.

Wear personal protective equipment.

Requirements before loading with food

■

The mobile shelf rack / plate rack has been cleaned properly.

■

The transport trolley is ready.

■

All parking brakes on the transport trolley are engaged.

4 Cooking procedures

User manual

65

Summary of Contents for convotherm 4













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands