Manitowoc convotherm 4 User Manual Download Page 21

Page: 21 / 140

3 For your safety

Purpose of this chapter

This chapter provides you with all the information you need in order to use the combi steamer safely

without putting yourself or others at risk.
This is a particularly important chapter that you should read through carefully.

3.1

Basic safety code

Object of this safety code

This safety code aims to ensure that all persons who use the combi steamer have a thorough knowl‐

edge of the hazards and safety precautions, and that they follow the warning notices given in the user

manual and on the combi steamer. If you do not follow this safety code, you risk potentially fatal injury

and property damage.

Referring to the user manuals included in the customer documentation

Follow the instructions below:

■

Read in full the chapter 'For Your Safety' and the chapters that relate to your work.

■

Always keep to hand the manuals included in the customer documentation for reference.

■

Pass on the user manuals included in the customer documentation with the combi steamer if it

changes ownership.

Working with the combi steamer

Follow the instructions below:

■

Only those persons who satisfy the requirements stipulated in this user manual are permitted to

use the combi steamer.

■

Only use the combi steamer for the specified use. Never, under any circumstances, use the combi

steamer for other purposes that may suggest themselves.

■

Take all the safety precautions specified in this user manual and on the combi steamer. In particu‐

lar, use the prescribed personal protective equipment.

■

Only stand in the working positions specified.

■

Do not make any changes to the combi steamer, e. g. removing parts or fitting unapproved parts.

In particular, you must not disable any safety devices.

Summary of Contents for convotherm 4













































































































































Search results

Summary of Contents for convotherm 4

Reviews:

Brands by name

Popular brands

Manitowoc convotherm 4, User Manual

Search results

Summary of Contents for convotherm 4

Reviews:

Brands by name

Popular brands