manualshive.com logo in svg

Manitowoc convotherm 4, User Manual

Share
Download
Manitowoc convotherm 4 User Manual Download Page 124

5.3.8  Emptying and cleaning the grease collecting canister (only applies to

ConvoGrill)

For your safety when using the appliance

Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings

specified in 'Working safely with the appliance' on page 113, and follow the instructions given there.

Dealing with extracted grease/used grease

■

Used oil and used grease must be disposed of in accordance with national laws and regulations

and in accordance with regulations from local disposal companies and authorities.

■

Used grease must not be disposed of via the drain into the sewerage system.

■

Extracted grease/used grease must not be reused for food processing.

■

Collect the used grease in suitable collecting containers and take it to waste recycling.

■

Personnel must be trained by the owner of the combi steamer.

Materials required

■

Large bottle brush

■

Common household detergent

■

Suitable collecting container for extracted grease (capacity >> 10 litres)

Properties of the grease collecting canister

Only the original grease collecting canister supplied must be used, because it is made of a material

that meets the requirements for receiving hot fat.

Emptying and cleaning the grease collecting canister

1.

Remove the screw cap (1) and attached tube from the

grease collecting canister (2).

2.

Suspend the screw cap (1) and attached tube, with the

tube mouth uppermost, from the forked bracket (3). This

prevents grease running out onto the floor, making it dirty

and slippery.

3.

Take care when handling the grease collecting canister

(2) to avoid grease spilling onto the floor, making it dirty

and slippery. This is particularly important when carrying

the open grease collecting canister (2) when it is full.

Pour the extracted grease out of the grease collecting

canister (2) into the collecting container for extracted

grease. When doing this, empty the grease collecting

canister (2) from the side to avoid the grease slopping

over.

4.

Clean the inside of the grease collecting canister (2) us‐

ing cleaning agent, plenty of hot water and the bottle

brush.

5.

Rinse out the grease collecting canister (2) with water

and let it drain well.

6.

Screw the screw cap (1) and attached tube for the grease

removal system back onto the grease collecting canister

(2).

7.

Place the grease collecting canister (2) upright beside the

appliance on a flat surface. The surface on which the can‐

ister (2) sits must not lie more than 15 cm above the sur‐

face supporting the appliance. The user's work area must

not be obstructed.

5 Cleaning procedures

User manual

124

Summary of Contents for convotherm 4













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands