manualshive.com logo in svg

Manitowoc convotherm 4, User Manual

Share
Download
Manitowoc convotherm 4 User Manual Download Page 113

5.3  Specific Cleaning Instructions

5.3.1  

 Working safely with the appliance

Your safety and the safety of your staff

Before your personnel start working with the combi steamer for the first time, familiarize yourself with

the information contained in the chapter 'For your safety' on page 21 and make relevant safety ar‐

rangements.
Instruct your personnel to learn the safe-working rules given in this section before starting work, and to

follow them strictly.
Instruct your personnel to familiarize themselves with the hazard warnings listed in this section and in

further instructions below, and instil in them the importance of taking the specified precautions.

Personal protective equipment for your personnel

Instruct your personnel to wear the correct personal protective equipment specified in the section 'Per‐

sonal protective equipment' on page 41 of the 'For your safety' chapter for the relevant tasks.

Hot surfaces

Risk of burns from high temperatures on interior and exterior parts of the appliance
You may get burnt if you touch any of the interior parts of the cooking chamber, the inside of the

appliance door or any parts that are or were inside the oven during cooking mode. In addition,

touching the air vent can result in burns.

Wait until the cooking chamber has cooled to below 60 °C before starting cleaning tasks.

Wear personal protective equipment.

Contact with cleaning agents

Risk of chemical burns or irritation to skin, eyes and respiratory system.
Direct contact with the ConvoClean new (S) cleaning agent or ConvoCare (S) rinse aid will irritate the

skin, eyes and respiratory system. Direct contact with the ConvoClean forte (S) cleaning agent will

result in chemical burns to the skin, eyes and respiratory organs.

Do not inhale the vapours or spray mist from the cleaning agent and rinse aid.

Do not let the cleaning agent or rinse aid come into contact with skin, eyes or mucous membranes.

Do not spray cleaning agent or rinse aid into a cooking chamber that is at a temperature of higher

than 60° C, because this will increase the caustic and irritating vapours given off by the cleaning

fluid.

Do not open the appliance door during fully automatic oven cleaning using connected canisters.

During fully automatic oven cleaning using single-measure dispensing, only open the appliance

door after being prompted by the software

Wear personal protective equipment.

Escaping gas

Risk of explosion from escaping gas
Escaping gas can ignite and cause an explosion.

For appliances on a wheeled platform and with a flexible connection pipe, you can move the

appliance forward within its range of movement when cleaning the case or the floor. The range of

movement is set by the retaining device used to secure the appliance in place (typically 0.5 m).

Never strain the connecting cables or pipes.

5 Cleaning procedures

User manual

113

Summary of Contents for convotherm 4













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands