4.
Open the appliance door.
5.
Add the rinse aid from the single-measure dispensing bot‐
tles to the cooking chamber.
If necessary for this procedure, pull the mobile shelf rack /
plate rack out of the cooking chamber and then push it
back into the cooking chamber after adding the rinse aid.
6.
Close the appliance door.
7.
Wait for the last wash cycle to finish (about 10 minutes).
8.
■
An audible signal is given when the final wash cycle is
finished.
■
Follow the prompts displayed by the software.
9.
■
Open the appliance door and check the cleaning result.
The cooking chamber should look clean and not smell
of leftover food or cleaning agents.
■
Check the cooking chamber for any foreign matter that
may have entered with the rinse water. Remove any
foreign matter.
■
If the cleaning result is not good enough, either clean
and rinse the cooking chamber manually or run a clean‐
ing profile again.
10.
Leave the appliance door ajar to let the cooking chamber
dry out.
5 Cleaning procedures
User manual
109
