manualshive.com logo in svg

Manitowoc convotherm 4, User Manual

Share
Download
Manitowoc convotherm 4 User Manual Download Page 104

5.2.5  How to perform semi-automatic oven cleaning (mobile shelf rack / plate

rack; does not apply to ConvoSmoke)

For your safety when cleaning

Before starting cleaning work, it is essential that you familiarize yourself with the rules and hazard

warnings specified in 'Safe working when cleaning' on page 95, and follow the instructions given there.

Prior knowledge required

You need to know these operations:

■

Opening and closing the appliance door safely

59

■

Taking food in and out using the transport trolley (does not apply to ConvoSmoke)

73

■

Releasing and securing the suction panel

120

Requirements

■

The roll-in frame is fitted in place and the empty mobile shelf rack / plate rack is in the cooking

chamber.

■

You are sufficiently familiar with using the software to be able to select and run different cleaning

profiles; please refer to the Operating instructions for the combi steamer.

■

No food has been left in the cooking chamber. There are no foreign objects in the cooking cham‐

ber.

■

All containers, baking trays, shelf grills and any other accessories have been removed from the

cooking chamber.

■

The oven drain is not blocked or clogged with any residues. The filter is fitted in place on the oven

drain.

■

The interior glass door of the appliance door is secured properly in place.

■

The suction panel is properly locked in place.

■

The appliance door is closed.

■

You have provided the necessary cleaning resources for your cleaning program; see 'Preparing

the cleaning agents' on page 94.

How to perform semi-automatic oven cleaning (mobile shelf rack / plate rack)

1.

Select the cleaning profile and start the cleaning process.

2.

Wait for the soak cycle to finish (about 10 minutes).

3.

An audible signal is given when the soak cycle is finished.

You are prompted to spray in the cleaning agent.

4.

Open the appliance door.

5.

Take out the mobile shelf rack / plate rack and the roll-in

frame.

5 Cleaning procedures

User manual

104

Summary of Contents for convotherm 4













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands