3-33
FRONT WHEEL
For this operation, we advise you to use the hydraulic jack MANITOU reference 505507
and the safety support MANITOU reference 554772.
- Place the jack under the flared axle tube, as near as possible to the wheel and
adjust the jack.
- Lift the wheel until it comes off the ground and put in place the safety support
under the frame.
- Completely unscrew the wheel nuts and remove them.
- Free the wheel by reciprocating movements and roll it to the side.
- Slip the new wheel on the wheel hub.
- Hand-tighten the nuts, grease them if necessary.
- Remove the safety support and lower the lift truck with the jack.
- Tighten the wheel nuts with a torque wrench (see: 3 - MAINTENANCE: F - DAILY
OR EVERY 2000 HOURS OF SERVICE OR 2 YEARS for tightening torque).
G3 – WHEEL
CHANGE
IMPORTANT
In the event of a wheel being changed on the public highway, secure the lift truck vicinity:
- Stop the lift truck, if possible on firm, level ground.
- To pass on stop of lift truck (see: 1 - OPERATING AND SAFETY INSTRUCTIONS: DRIVING INSTRUCTIONS UNLADEN AND
LADEN).
- Switch on the hazard warning lights.
- Immobilise the lift truck in both directions on the axle opposite to the wheel to be changed.
- Unlock the nuts of the wheel to be changed.
REAR WHEEL
For this operation, we advise you to use the hydraulic jack MANITOU Reference 505507.
- Place the jack under the rear axle, as near as possible to the wheel and adjust the jack.
- Lift the wheel until it comes off the ground and put in place the safety block under
the axle.
- Completely unscrew the wheel nuts and remove them.
- Free the wheel by reciprocating movements and roll it to the side.
- Slip the new wheel on the wheel hub.
- Hand-tighten the nuts, grease them if necessary.
- Remove the security block and lower the lift truck with the jack.
- Tighten the wheel nuts with a torque wrench (see: 3 - MAINTENANCE: F - DAILY OR
EVERY 2000 HOURS OF SERVICE OR 2 YEARS for tightening torque).
647177 (23/02/2017) MSI 40/50 T S3 ST3B
Summary of Contents for MSI 40 T S3 ST3B
