2-34
17 - FORWARD/NEUTRAL/REVERSE GEAR SELECTION
When operating this control, the lift truck should be travelling at slow speed and not
accelerating.
• FORWARD: Push the knob forward (position A).
• REVERSE: Pull the knob backwards (position B).
• NEUTRAL: The knob must be in the intermediate position to start the lift truck
(position C).
NOTE: As an OPTION, reversing lights and an acoustic reversing alarm indicate that
the lift truck is running in reverse.
SAFETY FOR MOVING THE LIFT TRUCK
Authorization to move the lift truck is controlled by an electronic unit. The operator
must observe the following sequence to move the truck forwards or backwards:
• 1 - sit down correctly in the driver’s seat,
• 2 - release the parking brake,
• 3 - engage forward or reverse movement.
To stop the lift truck, he must observe the following sequence:
• 1 - set the gear reverser in neutral,
• 2 - engage the parking brake,
• 3 - get out of the lift truck.
If these sequences are not observed (for example, leaving the driver’s seat without applying the parking brake), an acoustic
alarm sounds. You must then return the reversing gear to the neutral position and repeat the sequence.
18 - PARKING BRAKE
To prevent accidental loosening or release, the lever is fitted with safety locking.
- To apply the parking brake, pull the lever backwards (position A).
- To loosen the parking brake, release and push the lever forwards (position B).
A
B
19 - HYDRAULIC CONTROLS
IMPORTANT
Do not attempt to alter the hydraulic system pressure by interfering with the pressure regulating valve. In the event of
suspected malfunction, contact your dealer. ANY ALTERATION MAY RENDER THE WARRANTY NULL AND VOID.
Use the hydraulic controls carefully without jerking, to avoid accidents caused by shaking the lift truck.
Using the hydraulic controls is only possible if the driver is present and correctly sat on
his seat. Otherwise, the hydraulic controls are blocked.
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
NOTE: The engine r.p.m. automatically increases when lifting the load.
TILTING THE MAST
- The lever A to the left for backward tilting.
- The lever A to the right for forward tilting.
ATTACHMENT
- Lever B forward or backward.
ATTACHMENT (OPTION)
- The lever C forwards or backwards.
A
C
B
A
B
C
647177 (23/02/2017) MSI 40/50 T S3 ST3B
Summary of Contents for MSI 40 T S3 ST3B
