3-13
B5 – TYRE PRESSURE AND WHEEL NUT TORQUES
CHECK
IMPORTANT
Check that the air hose is correctly connected to the tyre valve before inflating and keep all persons at a distance during inflation.
Respect the recommended tyre pressures given.
- Check the condition of the tyres, to detect cuts, protuberances, wear, etc.
- Check the torque load of the wheel nuts. Non-compliance with this instruction can cause damage and rupture to the
wheel bolts and distortion to the wheels.
- Check and, if necessary, adjust the tyre pressures (see: 2 - DESCRIPTION: TYRES).
NOTE: There is an OPTIONAL wheel toolkit.
B6 – TENSION AND ALIGNMENT OF THE MAST LIFTING CHAINS
CHECK - ADJUST
Place the lift truck on level ground with the mast in a vertical position and the forks
raised approximately 200mm.
IMPORTANT
These checks are important for the good working operation of the mast.
In case of technical faults, consult your dealer.
- Check the alignment of the mast lifting chains between the carriage’s chain fasteners
and the chain rollers.
- Manually verify the chain tension and, if necessary, adjust as indicated below while
ensuring that the carriage is perpendicular to the mast.
- Loosen nut 1.
- Loosen the lock nut 2 of the chain tension adjuster.
- Adjust the tension by tightening or loosening the nut 3 while checking the alignment of the lifting chains.
- Then block the lock nut 2 and the nut 3.
- Retighten the nut 1.
B4 – CONDENSER CORE (AIR CONDITIONING OPTION)
CHECK
IMPORTANT
In a polluting atmosphere, clean the radiator core every day.
Do not use a water jet or high-pressure steam as this could damage the condenser fins.
- Visually check the cleanliness of the condenser.
- If necessary, clean the condenser using a compressed air jet aimed in the same
direction as the air flow.
- Clean with the fans running for best results.
1
2
3
B3 – ENGINE COMPARTMENT
CLEAN
IMPORTANT
Do not use a water jet or high-pressure steam.
- Lift up the cab (see: 2 - DESCRIPTION:
INSTRUMENTS AND CONTROLS).
- Clean the engine compar tment with
compressed air directed from the back
towards the front.
- Check the cleanliness of the area around
the exhaust particle filter 1.
1
647177 (23/02/2017) MSI 40/50 T S3 ST3B
Summary of Contents for MSI 40 T S3 ST3B
