Manitou MSI 40 T S3 ST3B, Operator'S Manual

Page: 100 / 114

3-34
G4 – CAB
LIFTING
PROCEDURE IN THE EVENT OF HYDRAULIC FAILURE ON THE LIFTING SYSTEM
IMPORTANT
The lifting procedure is a delicate and dangerous operation that must be carried out with care.
Check that any object left in the operator’s stand cannot impede the operation.
Tilt the mast as far forward as possible in order to avoid colliding with the lifted cab.
- Pull out and lock the handle 1 on the right-hand side to release the cab raising
mechanism.
- Close the cab door.
- Unscrew the two screws 2 at the rear of the roof and replace them with two MANITOU
eyes 3 Reference 72422.
- Use a pulley or winch (minimum load capacity 2000kg) as well as a sling (CMU
2000kg).
- Pass sling through pulley block and attach the ends of the sling to rings 3.
- Slowly lift the cab using the pulley until you are able to place the safety prop 4 in
its clip 5.
- Slightly open the cab door and release handle 1.
3
2
4
5
1
3
3
647177 (23/02/2017) MSI 40/50 T S3 ST3B